ETS-1000G - Ethernet analyzer

The smallest and most cost-effective 10M-to-10G Ethernet analyzer on the market for carrier Ethernet turn-up and troubleshooting.

  • : 28.02.2017
  • : 28.02.2022

Key features

A full range of Ethernet link speeds: from 10 Mbit/s up to 10 Gbit/s (LAN and WAN)
Throughput, back-to-back, latency and frame-loss measurements, as per RFC 2544 (asymmetrical results optional)
Up-to-10 traffic stream generation and analysis, perfect for turning up next-generation Ethernet services
EtherBERT™ testing of 10 Mbit/s, 100 Mbit/s, 1000 Mbit/s and 10 Gbit/s Ethernet circuits
Multiprotocol label switching (MPLS) support for carrier Ethernet
Packet jitter measurement for qualification of Ethernet transport networks for transmission of delay-sensitive traffic
Loopback modes: layers 1 to 4
Operations, administration and maintenance (OAM) testing: 802.3ah
Intelligent discovery of existing ETS-1000, ETS-1000L and ETS-1000G on a network with loopback to them
TCP/IP network configuration test suite and troubleshooting tools: includes TCP client, DNS lookup, ARP monitor, MAC, VLAN and IP flooding, ping and traceroute
Remote-control capability

Description

Field assessment of carrier Ethernet services

EXFO’s ETS-1000G is the smallest and most cost-effective 10M-to-10G Ethernet analyzer on the market. This analyzer enables service providers to turn up and troubleshoot next-generation Carrier Ethernet services. Its compact size, combined with a complete feature set, makes it the perfect tool for field technicians who need to reliably validate service-level agreements (SLAs) for Ethernet-based services.

Using this analyzer, technicians can transmit up to layer-4 traffic with fully configurable virtual local area networks (VLANs), multiprotocol label switching (MPLS) and quality of service (QoS) parameters. The ETS-1000G supports all of today’s necessary Ethernet/IP field-testing capabilities for troubleshooting, including RFC 2544, bit-error-rate testing (BERT) , packet jitter, and multistream generation and analysis.

Testing applications

QoS assessment

The ongoing deployment of GigE and 10 GigE circuits across access and metro networks requires a testing solution that can seamlessly adapt to either operating environment without sacrificing portability, speed or cost—while guaranteeing the performance and QoS metrics of these services.

The ETS-1000G assesses Ethernet services through its complex traffic capability, allowing for simultaneous testing of up to 10 streams representing different applications. Key performance indicators (KPIs) such as throughput, latency and frame loss are measured for each individual stream.

RFC 2544

RFC 2544 remains one of the most-used methodologies for Ethernet service turn-up. The ETS-1000G supports two RFC 2544 configurations. The first has a loopback at the remote end to provide round-trip results, and the second offers asymmetrical testing providing separate results for each test direction.