FTBx-88260 - 1G至100G多业务测试模块

提供可定制的1G-100G(包括25G/50G)测试功能,通过EXFO的开放式收发器系统(OTS)满足多种类型的收发器测试要求

Key Features

采用EXFO的OTS(Open Transceiver System):创新、革命性的设计,使任何收发器(现有或未来)都能够安装到EXFO的测试解决方案中
OTS支持多种接口:双SFP28接口、双QSFP28接口和单CFP4接口
提供速率直至50G的双端口以太网测试功能,包括一套完整的测试套件
提供iOptics测试应用程序,只需进行很少的配置便可迅速验证光设备的运行是否正常
兼容EXFO的LTB-8机架式平台,支持热插拔功能,便于在实验室内使用
兼容FTB-2 Pro平台,能够同时运行两个模块,最多支持4个25 GigE端口
兼容FTB-4 Pro平台,能够同时运行四个模块,最多支持8个25 GigE端口
可结合FTBx-88200NGE模块,构成支持10M至100G测试的解决方案
支持EXFO Multilink,这是一款基于Web的应用程序,便于多用户管理和远程访问

Applications

Ethernet/IP network testing and troubleshooting up to 100G
5G transport network validation (fronthaul, midhaul, backhaul)
Data centers

Specifications

Technical specifications
Exchange compatibility
OTS support QSFP28/QSFP-DD
Product type Module
Supported data rates 1G to 800G
Test Type Ethernet/Fibre channel/Transport/Wireless
规格书

Full Description

Rapid evolution in transceiver technology

Whether motivated by cost, power requirements, space or increased demand for bandwidth, pluggable transceivers are evolving rapidly. Predicting how long an existing transceiver will be required before another comes along to take its place is tough—making the obsolescence of today’s hardware simply a waiting game.
Another challenge is that network operators and data centers still need to support existing technologies, but also be ready to address new rates and technologies without always doing forklift upgrades. Whether we consider SFP and SFP+ (for rates up to 10G) or QSFP28 and CFP4 (for 100G) or SFP28 (for 25G rates), it’s clear that integrating all these into a network—as well as testing and validating them—is a huge task. The smart move is to allocate budget for versatile—not limited—solutions.

EXFO’s Open Transceiver System (OTS)

Introducing a new concept for the latest Power Blazer modules: EXFO’s Open Transceiver System (OTS). The OTS is an innovative, evolutionary design enabling any transceiver (now or future) to fit into an EXFO test solution. Benefits include:
  • Experience ultimate flexibility—swap out OTS modules right in the field, lab or on the production floor, choosing only the ones needed for whichever applications, rates or technologies under test.
  • Save tens of thousands of dollars by eliminating the necessity to completely replace an expensive testing module. Instead, change a less costly OTS module and extend the life of testing equipment.
  • Support multiple transceiver types simultaneously with a future-proof architecture designed to handle both current and upcoming high-speed transceiver technologies as they are developed and launched.

Support for multiple transceiver types


Dual SFP28
  • 10G / 25G / FC32x data rates
  • Ethernet Dual Port testing (EBERT, RFC2544, ESAM, TGEN), OTN, SONET/SDH, FC testing
  • The dual port can be shared with another OTS module, one port from each OTS module
Dual QSFP28
  • 40G/100G data rates
  • Framed Ethernet Dual Port testing (EBERT, RFC2544, ESAM, TGEN), OTN testing
  • The dual port can be shared with another OTS module, one port from each OTS module
Single CFP4
  • 100G data rate
  • Ethernet Dual Port testing (EBERT, RFC2544, ESAM, TGEN), OTN testing
  • The dual port can be shared with another OTS module, one port from each OTS module
Sync
  • Built-in GPS
  • Ideal solution for latency and clock testing
  • Next-generation timing application

主要优点

采用EXFO的OTS(Open Transceiver System):创新、革命性的设计,使任何收发器(现有或未来)都能够安装到EXFO的测试解决方案中
OTS支持多种接口:双SFP28接口、双QSFP28接口和单CFP4接口
提供速率直至50G的双端口以太网测试功能,包括一套完整的测试套件
提供iOptics测试应用程序,只需进行很少的配置便可迅速验证光设备的运行是否正常
兼容EXFO的LTB-8机架式平台,支持热插拔功能,便于在实验室内使用
兼容FTB-2 Pro平台,能够同时运行两个模块,最多支持4个25 GigE端口
兼容FTB-4 Pro平台,能够同时运行四个模块,最多支持8个25 GigE端口
可结合FTBx-88200NGE模块,构成支持10M至100G测试的解决方案
支持EXFO Multilink,这是一款基于Web的应用程序,便于多用户管理和远程访问

Description

收发器技术飞速发展

无论推动因素是成本、功率要求、空间还是不断增长的带宽需求,可插拔的收发器都在飞速发展。要预测还需要现有的收发器多长时间,直至出现另一个收发器来取代它非常困难——使得淘汰现有的硬件成为一场等待的游戏。
另一个挑战是网络运营商和数据中心仍然需要支持现有的技术,此外还需要准备应对新速率和技术,而不需要一直进行叉车式升级。无论我们是在考虑SFP和SFP+模块(用于最高10G的速率),还是QSFP28和CFP4模块(用于最高100G的速率),或是SFP28模块(用于25的速率),很明显将所有这些模块集成到网络中是一项艰巨的任务。聪明的做法是安排预算,采购功能多样,而不是功能有限的解决方案。

EXFO的开放式收发器系统(OTS)

为最新的Power Blazer模块引入新概念:
EXFO的开放式收发器系统(OTS)。OTS是一个创新、革命性的设计,使任何收发器(现有或未来)都能够安装到EXFO的测试解决方案中。优点包括:

• 体验终极的灵活性——在现场、实验室或制造环境中就可以替换OTS模块,根据应用、速率或被测技术只选择所需的模块
• 节省数万美元,不需要完全替换现有的测试模块。相反,可更换成本较低的OTS模块,延长测试设备的寿命。
同时支持多个类型的收发器,采用面向未来的架构,满足现有或即将出现的高速收发器技术。

支持多个类型的收发器

从左到右分别是: 双SFP28接口模块、单CFP4接口模块、双QSFP28接口模块、Sync接口模块

双SFP28接口模块

  • 10G/25G/FC32x数据速率
  • 以太网双端口测试(EBERT、RFC2544、ESAM、TGEN)、OTN、SONET/SDH、FC测试
  • 可以和另一个OTS模块共用双端口,每个OTS模块一个端口

双QSFP28接口模块

  • 40G/100G数据速率
  • 成帧的以太网双端口测试(EBERT、RFC2544、ESAM、TGEN)、OTN测试
  • 可以和另一个OTS模块共用双端口,每个OTS模块一个端口

单CFP4接口模块

  • 100G数据速率
  • 以太网双端口测试(EBERT、RFC2544、ESAM、TGEN)、OTN测试
  • 可以和另一个OTS模块共用双端口,每个OTS模块一个端口

Sync接口模块

  • 内置GPS
  • 进行延迟和时钟测试的理想解决方案
  • 下一代计时应用

支持