MOA-3800 - 可变光衰减器

单模和多模可变衰减器(VOA)可以精确地为四条、八条或十六条不同的光路添加衰减;还提供自动调整模式,自动监测输出功率并将其设置为所需的功率水平。

Key Features

端口密度非常高
阵列设计
自动
内置功率检测器(选购)
提供单模和多模型号

Specifications

Technical specifications
Product type Rackmount
规格书

Full Description

Two versions of the MOA-3800 exists: singlemode and multimode. Optimized for use with EXFO systems and software, the MOA-3800 Variable Optical Attenuator (VOA) can add precise attenuation to four, eight or sixteen different singlemode or multimode fibers (each fiber can be set independently). An optional self-adjusting mode is also available, which automatically monitors and sets the output power to the desired level.

With its remote control capabilities using Standard Commands for Programmable Instruments (SCPI) over Ethernet, the MOA-3800 is the ideal solution for the following applications:
  • bit error rate (BER) testing
  • system characterization
  • component or system loss simulation
  • optical margin analysis
  • WDM power balancing

Singlemode

KEY FEATURES
  • Optimized for singlemode fiber use
  • Wide attenuation range up to 40 dB
  • Protocol and bit rate independent
  • 4, 8 or 16 channels housed in 1U
  • SCPI over Ethernet remote control
  • Available with VOAs only, or with a self-adjusting power option
  • Linear response

Multimode

KEY FEATURES
  • Optimized for multimode fiber use
  • Stable attenuation, independent of mode fill condition
  • Protocol and bit rate independent
  • 4, 8 or 16 channels housed in 2U
  • SCPI over Ethernet remote control capabilities
  • Available with VOAs only, or with a self-adjusting power option
  • Linear response

主要优点

端口密度非常高
阵列设计
自动
内置功率检测器(选购)
提供单模和多模型号

Description

MOA-3800有两个型号:单模和多模。MOA-3800可变光衰减器(VOA)进行了优化,可与EXFO系统和软件一起使用,能够精确地为四条、八条或十六条不同的单模或多模光纤(每根光纤可单独设置)添加衰减。它还提供了可选的自动调整模式,自动监测输出功率并将其设置为所需的水平。

MOA-3800具有通过以太网使用可编程仪器标准命令(SCPI)进行远程控制的能力,是以下应用的理想解决方案:

  • 误码率(BER)测试
  • 系统鉴定
  • 器件或系统损耗模拟
  • 光裕度分析
  • WDM功率平衡

单模

主要功能

  • 针对单模光纤的使用进行优化      
  • 衰减范围光,最高可达40 dB
  • 不受协议和比特率影响
  • 在1U的空间里有4、8或16个通道
  • 通过以太网,使用SCPI远程控制
  • 仅适用于VOA,或自动调整功率选件
  • 提供线性响应

多模

主要功能

  • 针对多模光纤的使用进行优化             
  • 衰减稳定,不受模式填充状况影响            
  • 不受协议和比特率影响
  • 在2U的空间里有4、8或16个通道
  • 通过以太网,使用SCPI远程控制
  • 仅适用于VOA,或自动调整功率选件
  • 提供线性响应

支持